Granada Axle Flange

It seems like an endless game, drawing up all these components, but the 5 Stud Granada Rear Axle flange has now been drawn up.

These are the 27 spline, 5 x 112mm axle flanges from a 1986 – 1994 Ford Granada / Scorpio.

Other vehicles to share the 5 x 112mm stud pattern are:

  • Ford Galaxy
  • Mercedes – All models except sprinter
  • Seat Alhambra
  • VW pre 96 Passat, Caravelle, Transporter, Sharan
  • Pre 1990 Audi 100, A4, A6, A8, V8, S2, S4, S6

 

Unlike the Ford Sierra 4 stud equivalents it is still possible to pick these up in unused condition. I managed to get a pair still in their original Ford packaging.

Sierra 100mm Stub Axle

There is a choice of two sizes for the Ford Sierra Rear Stub Axle : 100mm 108mm For this project I've chosen (read bought) 100mm rear stub Axles (27 spline). Again, I've been lucky and got a pair of brand new Ford Sierra Cosworth Group N stub axles. Another bargain. Luckily, they ...

Sierra Rear Shafts

How do they measure Sierra Rear Shafts? There are obviously different length versions made, but even ones that appear the same length have subtle differences. Take these two shafts, at first glance they appear very similar. But one uses an both inner and outer split rings(bottom)and the other ...

Rear Suspension

The rear suspension is now taking shape. I was beginning to think that I would never find a Sierra Diff! Nearly a year of surfing and hundreds of bids later, I have a gem of a diff. When I opened it up, there was zero signs of wear and the ...

Granada Rear Hubs

Sometimes, when parts arrive, they look too rusty to be of any good. These Ford Granada Rear Hubs were very rusty indeed. Everywhere they stood you'd find a pile of rust flakes. The hub on the left was dunked in the electrolysis bath for 4 hours. Electrolysis strips away rust without ...

Sierra Tripod Differential

The Sierra Diff was quite hard to measure and draw up. I started with the push in shaft 7" 'Tripod' version. Most of the time drawing up this Ford Sierra Differential was taken during the measurement stages. When there are so many dimensions to be taken you almost need a 3D ...

Caterham Rear Diff Cover

I've replaced the rear suspension mounts with roller bearings, but in the the process discovered that there was no way to remove the differential. The rear chassis is different to the standard Haynes Roadster as it has much more triangulation. This makes the access to the differential very tight. It ...

Sierra 3.9:1 Front Differential

It's been a few weeks since my last blog and for good reason. My project has a new home. I had to knock down walls and do some pretty scary electrics, but the work is coming to an end. The next job is a heavy duty chassis table. More good ...

Sierra Cosworth Differential

This isn't just an Sierra Cosworth Differential, it's the missing dimensions I need to finish the suspension analysis in rFactor and Kangaloosh. I was missing the measurement between to the two 100mm drive shaft bolt flanges. Now I have everything, it's all systems GO! My advice : - If you see ...

Translate »

Web Design by Go Web Solutions