Call me sick but don’t images like these make you weak at the knees? A Honda V6 4wd Haynes Roadster / Locost. What an amazing project!
Inboard suspension, 4×4 MT75 gearbox, what more can be said??? Dribble Dribble……
Check out his photo gallery at Locost Builders http://www.locostbuilders.co.uk/photos.php?user=Liam&action=gal
Making the bonnet is going to be a huge challenge, so I decided to mock it up. There was...
With the scuttle 80% done, this Locost was starting to look less and less Hot Rod and more 70’s...
I wanted a steel scuttle but the MG Midget has a bolt on aluminium item designed for a soft-top...
I needed some Basic IVA glass for my Hot Rod. This Hot Rod will need BIVA testing to get...
I have used various brake components and I have no idea how good the brakes will work or feel...
I've been moving my car and all my tools. Now the bodywork can begin. The wooden buck has been...
I’ve fitting an electric water pump to my Rover V8. The P38 water pump I was using tried to...
Having built one half of a wooden car body buck, I'm making a wire frame buck. The plan is...
My Megasquirt ECU V8 project is getting close to the point of turning the key. I decided to tidy...
Putting a Rover V8 and 4wd into a Locost was always going to take a long time. Finishing the...
Fitting two fans, one each side of the radiator in a push pull air flow arrangement has made a...
There are many skills and tools that will come in very ‘handy’ during a Kit Car or Hot Rod...
