Rover V8 Plenum Chamber

Rover V8 Plenum

This might just look like a Rover V8 Plenum Chamber, but in fact it will enable me to judge bonnet height.

The Rover V8 engine is quite tall compared to others I’ve looked at and I am determined not to have a huge bonnet bulge that looks like a hideous after thought. I want the bodywork to look like it was planned, not modifed or cut away around an engine.

Lets face it, the Haynes Roadster isn’t exactly the biggest car that hit the roads and certainly wasn’t designed with the Rover in mind.

Rover V8 CAD Drawing

Rover V8 to MT75 Adaptor CAD

Off to Exeter today for the Kit Car show ☺

Putting this all into CAD will have to wait a few days.

Rover V8 Timing Chain Cover Part 3

What is a Serpentine Front Cover? Will it save me the room I need? The Rover V8 serpentine timing chain cover was fitted to 'interim' Land Rovers, long after the demise of the SD1 Rover. The engine I have, is from an SD1 Vitesse and unfortunately I am having problems

Rover V8 Inlet Trumpets

Many people modify the length of the Rover V8 Inlet Trumpets within the plenum. However, until I get my Rover V8 up and running I keep mine as Land Rover intended. The first job for me was to get it drawn up into CAD. - Basically an excuse not to be

Rover V8 Timing Chain Cover - Part2

Rover V8 Timing Chain Cover

Rover V8 Timing Chain Cover for short water pump. What's the shortest water pump assembly that can be fitted to the Rover V8? The Rover 3500 SD1 had a very similar front timing cover to that of it's predecessor, the P6. The P6 timing chain cover always suffered

Rover V8 CAD

The BW35 bellhousing for the Rover V8 hasn't arrived, so I've started drawing up other parts of the engine. This may look like just another rocker box, but in fact it is actually a sign that I've decided to draw the Rover V8 engine. I reckon, long

Rover V8 Dimensions

Rover V8 Dimensions are often misquoted on the web. The weights given are often on the light side too. The dimensions suggest an engine with exhausts, fans and torque converters. The weights however suggest a completely stripped engine without inlet manifold, exhausts ancillaries etc. A running unit, with oil and

Rover V8 to MT75 Adaptor Plate - part 3

I've been having fun converting my Rover V8 to Sierra Cosworth MT75 4x4. When you find  the correct solution to a problem, sometimes it makes previous efforts look like a waste of effort. Rover V8 to MT75 gearbox using LT77 bell-housing - Part 1 Rover V8 to MT75 gearbox

Rover V8 Lifter Valley

This is my Rover V8 3.5 Vitesse engine. I was planning upon stripping every last nut and bolt, but...... When the outside is covered in ¼" of thick oil, I was not expecting this! I've not cleaned it, that really is golden aluminium. No doubt, with a quick rub,

Translate »

Web Design by Go Web Solutions