Tag Archives: a9CAD

Duratec V6

Pin It

The intention with this build, is to have 4wd and a modern V6. This presents numerous obstacles to overcome. The Jaguar X-type shares a common bond with the Mondeo ST220. The Duratec V6 is an excellent engine and can be…

Pin It

Sierra Uprights

Pin It

The Ford Sierra upright can be modified to from a MacPherson Strut to an upright for an A-Arm setup. The top ball joint is from a Ford Transit van, as per the book by Chris Gibb. The top ball joint…

Pin It

Rorty Uprights

Pin It

Rorty Designs produced some drawings of Cortina Replacement uprights but I don’t believe they went into production. Instead of the custom manufactured spindle, maybe a bolt on item such as that from a Ford Sierra could be utilized.

Pin It

Cortina Upright

Pin It

From the drawing below it can be seen that the Mk3/4/5 Ford Cortina Upright has : A KPI / SAI of 4.25° Fulcrum of top Ball joint to hub face 149.15mm Fulcrum of Bottom joint to hub face 133.12mm Fulcrum…

Pin It

Components

Pin It

Locost / Haynes Roadster CAD If you are building a Locost or Haynes Roadster then you may find the following CAD dxf and dwg drawings handy. I started my chassis plans form scratch and have a produced literally hundreds of…

Pin It

Design and CAD programs

Pin It

In order to design the chassis I had to familiarise myself with various Free peices of CAD software. Luckily, working at a college, I have unlimited access to AutoCAD machines, that offer a broader design spectrum. SolidWorks eDrawings − handy…

Pin It

Kangaloosh

Pin It

This Haynes Roadster has been used with Kangaloosh Gaming Software. It’s not for toys, the big race teams use it too and the results can definitely be very interesting.

Pin It