The front propshaft for a 4×4 Locost 7 has to clear numerous components such as the starter, exhaust & steering. There needs to be a central Universal Joint.
The aim is to have AWD, employing the drive-shafts from the front of a Ford Sierra 4×4. The Ford Sierra actually has 3 drive-shafts, as one section passes through the sump. With this design the middle ‘sump’ drive-shaft will pass…
The Sierra 4×4 Front Differential was fitted to the following models: 2.0lt DOHC 4×4 Sierra (1982-1993) – some were 3.92:1 2.9V6 4×4 Sierra (xr4x4i) – 3.62:1 Cosworth Sierra 4×4 – 3.62:1 Cosworth Escort YB 4×4 – 3.62:1 Granada Scorpio 4×4…
The Citroen BX rack has meant several changes to the steering, propshaft and exhaust manifolds
The Ford Sierra Front Differential has finally been mounted to this Haynes Roadster Chassis.
I’ve made up a custom aluminium housing to replace the section that would be part and parcel of the sump. A 4×4 Haynes Roadster has been a lot of work.
I’ve started to mock up the front 4×4 system. In CAD everything looked extremely tight. I spent ages moving components back and forth to get everything to fit. So far, in the mock up. There looks like bags of room.…
Building a 4×4 Kit Car isn’t easy. Building a 4wd sports car from scratch is even harder. Getting the Sierra front differential to fit has been slow but surprisingly simple.
A Haynes Roadster 4×4 needs a special Ford Sierra Front Differential. The Sierra one needs a far bit of modification, but it’ll be worth the effort.
Haynes Roadster 4×4 are thin on the ground. The Ford Sierra Front Differential needs a fair amount of modification to fit. As does the chassis and sump.
Web Design by Go Web Solutions