Custom Ford Sierra Upright Part 2

I’ve been boxing in one of my custom Ford Sierra Front Uprights. So far, I’m quite pleased with how they look.

I’ve also had a trial fitment of the bearings and they slid straight in as if the uprights had just dropped off the production line. When I say ‘slid’, that’s not quite true, as there was a mallet and bearing press involved. I hadn’t spotted an almost invisible ball of weld splatter. Once I took the bearing out again, chipped off the weld spit, it was then they ‘squeezed’ straight in.

As regular readers will know, I’d swapped from front mounted Ford Escort MK2 rack to a rear mounted Citroen BX item. This was because the route my steering linkage was taking around the Ford Sierra 4×4 Front Differential wasn’t at all good and the original Escort rack was 20mm too far forward.
I couldn’t simply swap the uprights from one side to the other because the Ackermann Geometry would have been totally wrong. Therefore, the only suitable option I could see, was to make my own. Custom uprights would solve an issue I was having with the bottom mount on the lower A-Arm and allow me to fit some more powerful and lighter brakes.

I’ve made my new Front 4×4 Ford Sierra Uprights using dimensions taken from a Ford dimensional drawing:
Ford Sierra Front Upright Dimensions
The drawing came from a very helpful Polish Locost builder (thanks filemon!).
Isn’t the internet great 🙂

When I finished my CAD drawings, I was a little concerned that the walls of the central bearing housing were a little thin. I’m now totally satisfied that they are plenty strong enough.Steel Ford Sierra Upright

I haven’t made the steering arm, mostly because I am still waiting for the 12mm steel sheet I ordered a couple weeks back. I have turned and reamed out the mount for the track rod end and cut the 25mm bars ready and waiting. Hopefully next time I return to the workshop, progress will seem a far bit quicker.

I’ve been using a mixture of 3mm and 8mm steel plate to do the boxing. Once I’ve welded on a couple of shims they will be ready for final machining (just to make sure they haven’t distorted during welding).

Some custom uprights are works of art, especially when CNC machined from solid aluminium, others are very functional and strong looking, but once these ones are covered with some black powder coat, they are going to look almost ‘stock’. On a CAD screen that wasn’t the case. Maybe that’s not a bad thing….

Custom Ford Sierra Upright

When a complete novice like me, makes parts like this, there is still a huge amount of uncertainty on whether they will work ‘on the road’. With many parts, as soon as the bolts are tight, any worries disappear. At the moment, all I know is, ‘in theory’, they ‘should’ be miles better than what I had.
At least the Ackermann Angle will be adjustable.

I’m going to use 300mm Jaguar X-type discs (machined to 5×112 bolt spacing) and Mercedes E320 Brembo calipers. I had a very quick ‘mock up’ of how things will look.

Custom Ford Sierra Upright

I’ve got a several complete Ford Sierra Front Uprights under the bench. Some have sliding calipers, others cast iron 4 pot brakes. I know the steering arms and discs are still missing but mine are noticeably lighter than all ‘off the shelf’ options. Once I have finished, I’ll put them on the scales. Without exact measurements I’d say the uprights will end up very similar weight to the Ford ones. The discs are bigger and definitely heavier but the Mercedes calipers are much lighter, so with a bit of luck my 300mm, 4 pot, big brake conversion will end up much the same weight as the standard 242mm single pot set-up.

See also:

Custom Ford Sierra Upright - steering arm

Getting the dimensions correct for this custom Ford Sierra Upright hasn't been easy. The reason for making a new upright was the steering arm on the standard upright being wrong for my particular application. Therefore, getting the next stage right, is very important. The next job on the custom front ...

Custom Sierra 4x4 Uprights Part 2

A while back, I'd bought some super light weight billet Outlaw aluminium callipers (Wilwood copies). At the time I didn't have the front discs to check them against so they were just put under the bench. When the Granada 278mm front discs arrived, I soon saw that these callipers were ...

Custom Sierra 4x4 Uprights

I've started to make my own front uprights. The CAD has taken a while, plus I have had to do some extra research into suspension geometry. A lot of people seem to know about Ackermann Geometry, but the well known image of the two lines intersecting at the rear axle ...

Custom Ford Sierra Front Uprights

I had to enrol the skills of the 'brother in law' to TIG weld the new Ford Sierra based front uprights. He's done a cracking job :) The upright has the same bolt spacing for the Mercedes S320 Brembo calipers as the removable steering arm assembly. Therefore uprights can be swapped ...

Ackermann Angle and Sierra Uprights

I'd swapped from front mounted Ford Escort MK II rack to a rear mounted Citroen BX rack. I needed to get my Ackerman Angle correct. see here: To do this I just reversed the uprights and made some new rack extensions. The ...

Custom Ford Sierra Upright – steering arm - Part 2

Building a 4x4 Locost Rover V8 Kit Car, means making custom front uprights. Ford Sierra Uprights were used as the starting point. This Haynes Roadster with Custom Ford Sierra Uprights has parts from many makes and models of cars. Ford Sierra 4x4 Cosworth Ford Scorpio Jaguar X type Austin Ambassador ...

Haynes Roadster Steering Rack Part 2

I wasn't at all happy with my steering. Because this car is 4x4, the rack was pushed nearly 2" further forward than on a standard Haynes Roadster / Locost. The steering arms were angled backwards about 5 degrees. It didn't look good. Ideally, the steering arms should be in-line with the steering arms / ...

Haynes Roadster Mushroom Adaptors

I'm using Ford Sierra 4x4 front uprights. But here lies a problem...... The standard Haynes Roadster / Locost and indeed many other kit cars use Ford Sierra 2wd uprights (I'm 4x4). The upright is normally fitted to the bottom of the suspension strut but in order to change it's usage to ...

Translate »

Web Design by Go Web Solutions